欢迎访问济南宁达建材有限公司!

济南宁达建材有限公司

联系人:李经理

电话:15954121087

移动电话:15153190187

地址:山东省济南市天桥区小清河北路滨河商务中心D座24层2402

当前位置:首页>新闻动态>>常见问题>>卫生间隔断配件的组成有哪些

卫生间隔断配件的组成有哪些

来源:http://www.jnndjc.com 日期:2022-12-23 发布人:ningda

在安装和使用卫生间隔断的时候,会用到配件,有的起固定作用,有的是为了方便以后的使用,具体都会使用到哪些配件呢?下面济南卫生间隔断厂家带您来了解一下。
When installing and using the toilet partition, you will use accessories, some for fixing, and some for future use. What accessories will you use? Next, Jinan bathroom partition manufacturer will take you to know.
1.合页:采用自攻螺丝安装,适用于内开门; 内有尼龙升降面实现自动回关,并可调整关门角度,内有48个角度可以调整,每次调整7.5度;分左右,以内开门方式区分。
1. Hinge: It is installed with self tapping screws, and is suitable for inner door opening; There is a nylon lifting surface inside to realize automatic closing, and the closing angle can be adjusted. There are 48 angles inside that can be adjusted, 7.5 degrees each time; It is divided into left and right, and internal door opening mode.
2.门锁:旋转式锁把,卫生间隔断配件更易于使用且不受板材变形影响;带紧急开门开关;带有/无人指示牌;内侧旋转式锁把,每90度有定位;指示盘直径为55mm。
2. Door lock: rotary lock handle, toilet partition fittings are easier to use and are not affected by plate deformation; With emergency door opening switch; With/without signboards; Inside rotary lock handle, with positioning every 90 degrees; The diameter of the indicator plate is 55mm.
济南卫生间隔断
3.支脚:可夹板厚度12mm(抗贝特板)和18 mm(普通板材); 可调整高度为110mm-130mm;可定加工成夹任意厚度板材夹口、更高或更低安装高度;可选择采用316L不锈钢原材料生产。
3. Foot: plywood thickness of 12mm (anti beta plate) and 18mm (ordinary plate); The adjustable height is 110mm-130mm; It can be customized to clamp any thickness of the plate with a higher or lower installation height; 316L stainless steel raw materials can be selected for production.
4.拉手:直径为38mm; 可选择单面安装也可选择里外对穿安装;可选择采用316L不锈钢原材料生产。
4. Handle: 38mm in diameter; Single side installation or inside and outside installation can be selected; 316L stainless steel raw materials can be selected for production.
5.角码:厚度3mm;沉头螺丝均经过仔细打磨抛光,更和谐美观。
5. Corner code: 3mm thick; The countersunk screws are carefully polished to make them more harmonious and beautiful.
6.吊杆:可夹板厚度12mm(抗贝特板)和18 mm(普通板材); 可定加工成夹任意厚度板材夹口、更高或更低安装高度;可选择采用316L不锈钢原材料生产;不锈钢拉杆圆管直径为32mm。
6. Suspender: plywood thickness of 12mm (anti beta plate) and 18mm (ordinary plate); It can be customized to clamp any thickness of the plate with a higher or lower installation height; 316L stainless steel raw materials can be selected for production; The diameter of stainless steel pull rod round pipe is 32mm.
除了配件方面的问题,在防水处理上也要注意。在新交付使用的楼房中,卫生间,浴室和厨房的地面都有按照相关规范做的防水层,只要不破坏原有的防水层,一般不会渗漏。更多相关内容就来我们网站http://www.jnndjc.com进行咨询吧!
In addition to parts, attention should also be paid to waterproof treatment. In newly delivered buildings, the floors of toilets, bathrooms and kitchens have waterproof layers made in accordance with relevant specifications. As long as the original waterproof layer is not damaged, there is generally no leakage. More relevant content will come to our website http://www.jnndjc.com Consult!
济南宁达建材有限公司

济南宁达建材有限公司

联系人:李经理

电话:15954121087   移动电话:15153190187

邮箱: 1499873208@qq.com

地址:山东省济南市天桥区小清河北路滨河商务中心D座24层2402

www.jnndjc.com(复制链接) 济南宁达建材有限公司