On the bathroom partition wall, many places have moisture-proof provisions. And the advantage of moistureproof is the quality of the wall. To put it simply, we can't break the wall. So from the perspective of moisture-proof, what are the provisions of toilet partition? The following is to answer the question of whether the toilet partition wall will seep. Let's study together!
In short, people's walls are vertical masonry with single brick. Like this wall, its thickness is only as thin as a brick, that is, six points. This kind of wall has poor reliability and is easy to crack, so it is easy to cause water seepage.
1. The reliability of single brick vertical wall is poor, which is due to the small distance between the wall and the foundation surface. Accompanied by the improvement of aspect ratio, the reliability of the wall is getting worse and worse. In short, this kind of wall will fall as soon as we push it.
Jinan toilet partition
2. The pull force between the single brick wall and the original wall is poor, and the wall itself is prone to tilt. Considering these two reasons, many parts of the wall are easy to crack.
Therefore, the above two reasons will lead to cracks in the six partition wall, and the cracks will separate the moisture-proof of the surface, so the probability of water seepage is bound to expand.
Through the above introduction. I believe we all know this problem. But I still suggest that you do not need to do toilet partition, at least brush 12 bricks. The reliability of this wall is a little better, which is conducive to masonry in the middle and later period.
No matter what type of wall everyone's bathroom partition do, we should do a good job in the smooth wall and the middle of the crack fiber countermeasures. In addition, we should also solve the overall putty of the wall. Before doing waterproof to the toilet, be sure to check whether there are cracks. For the crack part, we must kick it open, and then fill the crack to make waterproof.