1、确定铝合金的长度并剧好
1. Determine the length of the aluminum alloy and adjust it accordingly
铝合金的距离就等于门与门之间的距离减去两个弯头的长度（20公分）只需要测量门与门之间的距离就可以了，这个距离减去20公分就是我们需要的铝合金的长度用切割机接好就可以。
The distance of aluminum alloy is equal to the distance between the door and the door minus the length of two elbows (20 centimeters). Simply measure the distance between the door and the door, subtracting 20 centimeters from this distance is the length of aluminum alloy that we need to connect with a cutting machine.
2、在铝合金和对应墙面上打眼
2. Drill holes in aluminum alloy and corresponding walls
这时需要用到可调速手电钻在剧好的铝合金两头各缩进10公分的位置打眼，两个眼之间的部分以70公分为一个据点打眼，相应的对应位置在墙上用充气钻打好眼，后用11公分长的螺栓对应支架固定到墙上，防撞扶手离地面的高度80-85公分为宜，以防撞扶手下端到地面距离计算
At this point, it is necessary to use a adjustable speed electric drill to drill holes at the positions where the two ends of the aluminum alloy are indented by 10 centimeters. The part between the two holes is drilled at a point of 70 centimeters, and the corresponding positions are drilled on the wall with an inflatable drill. Then, an 11 centimeter long bolt is used to fix the bracket to the wall. The height of the anti-collision handrail from the ground is 80 to 85 centimeters, which is calculated based on the distance from the lower end of the anti-collision handrail to the ground
3、固定弯头扣上面板安装完成
3. Fixed elbow buckle panel installation completed

把两端的弯头用螺丝固定住，固定好之后，再测量一下两个弯头之间的距离，这个距离就是需要的面板长度，用切割机剧好，从上到下的顺序扣上边安装好了。
Fix the elbows at both ends with screws, and after fixing them, measure the distance between the two elbows. This distance is the required panel length, and use a cutting machine to cut it. Install the edges from top to bottom.
防撞扶手的主要特点：防护墙角，牢固可靠，美观实用与防撞扶手、护墙板起着美观、统一的效果安装维护保养方便、经久耐用色彩型号多样，能满足风格各异的环境所需阻燃、、易于清洁。
The main characteristics of anti-collision handrails are: protective wall corners, firm and reliable, beautiful and practical. The anti-collision handrails and wall panels have a beautiful and unified effect, and are easy to install, maintain, and maintain. They are durable and have a variety of colors and models, which can meet the needs of different styles of environments, such as flame retardant, antibacterial, and easy to clean.
防撞扶手采用高聚物为外饰物，防腐，;安装简单，维护保养方便，经久耐用;防撞扶手色彩多样，造型新颖，适合多种场合使用;内芯为铝合金设计，紧固合理;表面皮纹，防火耐光，清洁简易;保护墙体，防撞抗击，外形美观;防撞扶手有特殊设计的防撞胶条，起到防震、抗冲作用。以上这些特性为防撞扶手应如何更好的发挥功能做好了充分的准备经济性：组装式设计和施工，损坏时可部分更换。
The anti-collision armrest adopts high polymer as the exterior decoration, which is anti-corrosion and antibacterial; Simple installation, convenient maintenance, and durability; The anti-collision armrest has diverse colors and novel designs, making it suitable for various occasions; The inner core is professionally designed with high-quality aluminum alloy, with reasonable fastening; Skin lines on the surface, fire and light resistant, easy to clean; Protect the wall, prevent collisions and strikes, and have a beautiful appearance; The anti-collision armrest has a specially designed anti-collision adhesive strip, which plays a shockproof and impact resistant role. The above characteristics provide sufficient preparation for how the anti-collision armrest can better function economically: modular design and construction, with partial replacement in case of damage.
性能特点：突出装潢效果：根据空间环境可选择多种颜色，室内装潢效果佳。
Performance characteristics: Highlight the decoration effect: Multiple colors can be selected according to the spatial environment, resulting in excellent interior decoration effect.
墙角缓冲作用：安装在墙角保护可缓冲各种推车、物体撞击，可防止墙体损伤和人体受伤。
Wall corner buffering function: Installed in the wall corner protection, it can buffer various carts and object impacts, and prevent wall damage and human injury.
在扩建中医院应量体裁衣，在不同区域的地材安装装配合适的建材，例如在人员经常走动发楼道，楼梯口安装防撞扶手，避免由于人多造成的碰撞和一些不必要的损失。按照医院各部门的特殊要求而量身打造，这样既可以减少建筑成本，又可以物尽其用。如复健区要求地板脚感舒适，人流量大的地方注重耐磨、不易损坏的防撞扶手的安装，同时更要强化性，防撞扶手防撞表面长效防滑的设计保证了行走。
In the expansion of the Traditional Chinese Medicine Hospital, appropriate building materials should be installed and assembled in different areas. For example, anti-collision handrails should be installed in corridors and stairwells where people frequently move, to avoid collisions and unnecessary losses caused by large numbers of people. Tailored according to the special requirements of various departments in the hospital, this can not only reduce construction costs but also make the most of everything. For example, the rehabilitation area requires a comfortable floor and foot feel, and in areas with high pedestrian flow, attention should be paid to the installation of wear-resistant and non easily damaged collision handrails. At the same time, safety should be strengthened, and the long-term anti slip design of the collision surface of the collision handrails ensures walking safety.