欢迎访问济南宁达建材有限公司!

济南宁达建材有限公司

联系人:李经理

电话:15954121087

地址:山东省济南市天桥区小清河北路8888号滨河商务中心D栋办公楼601—1室

当前位置:首页>新闻动态>>行业资讯安装楼梯防护扶手时的7个过程

安装楼梯防护扶手时的7个过程

来源:http://www.jnndjc.com 日期:2023-02-03 发布人:admin
如今,人们在安装楼梯的时候都会安上扶手,这样才会一些,如何安装楼梯扶手?下面济南防护扶手厂家来讲讲安装楼梯防护扶手时的7个过程。
Nowadays, people will install handrails when installing stairs, so it will be safer. How to install stair handrails? Next, Jinan protective handrail manufacturer will talk about the seven processes of installing stair protective handrail.
1.安装楼梯导轨以固定上下支柱,然后在两个支柱之间画一条直线,然后将中心支柱放在台阶上(支柱在台阶上来回移动)将它们放在与线条相同的高度。)在柱子的固定孔中用标记绘制一个打孔标记,然后打出固定的行。
1. Install the stair guide rail to fix the upper and lower pillars, then draw a straight line between the two pillars, and then place the central pillar on the step (the pillar moves back and forth on the step) and place them at the same height as the line.) Draw a punch mark with the mark in the fixed hole of the column, and then punch a fixed line.
2.如果安装了楼梯扶手,如果已铺设地砖或大理石,您可以先用玻璃钻孔打孔,然后再用橡皮泥打孔你可以用一个圆圈。?在冲出玻璃钻头后,如果基础是用12毫米直径冲击钻钻的木板,则可以使用自攻螺钉直接固定柱子。
2. If the stair handrail is installed, and if the floor tile or marble has been laid, you can drill holes with glass first, and then drill holes with plasticine. You can use a circle.? After punching out the glass drill bit, if the foundation is a plank drilled with a 12mm diameter impact drill, the self-tapping screw can be used to directly fix the column.
3.安装楼梯扶手并布置电线使用薄的独立水管将电线拉入并在必要时弯曲。这节省了时间和精力。如果直径超过12毫米,可以使用特殊工具弯曲电线,并在拉丝时,确定电线的弯曲位置。螺孔固定在支柱上。
3. Install the stair handrail and arrange the wires. Use thin independent water pipes to pull the wires in and bend them if necessary. This saves time and energy. If the diameter is more than 12mm, special tools can be used to bend the wire, and the bending position of the wire shall be determined first during wire drawing. The screw hole is fixed on the strut.
济南防护扶手
4.固定扶手固定扶手:墙面防护扶手安装测量需要弯曲的地方热弯曲的毯子在扶手中加热,需要弯曲15-20分钟扶手弯曲以便软化你也一样。?(如果热弯的毯子很长,你可以松开不需要弯曲的热弯毯子)。反复擦拭外倾角的成形臂直其停止。在运输或日常使用过程中扶手上的划痕会影响外观。您还可以使用加热毯在加热和摩擦后去除划痕。
4. Fixed handrail fixed handrail: For the installation of wall protective handrail, first measure the place where it needs to be bent, heat the hot bent blanket in the handrail, and bend the handrail for 15-20 minutes to soften you.? (If the hot bending blanket is very long, you can loosen the hot bending blanket that does not need to be bent). Wipe the camber forming arm repeatedly until it stops. Scratches on the handrail during transportation or daily use will affect the appearance. You can also use a heating blanket to remove scratches after heating and rubbing.
5.将扶手插头安装在楼梯扶手上,墙面防护扶手安装安装电线插头并拧紧需要拧紧的顶部电线。
5. Install the handrail plug on the stair handrail, install the wire plug on the wall protective handrail and tighten the top wire to be tightened.
6.一些需要楼梯扶手的顾客需要在扶手和墙壁上连接,墙面防护扶手安装墙面防护扶手安装围绕扶手和墙壁接触的地方,然后敲击墙壁和扶手上的塑料延长管击中插头的中心。钻一个孔,用自攻线将扶手插头固定到延长管和墙壁上,然后将扶手插入扶手插头。
6. Some customers who need stair handrails need to connect the handrails and walls. The wall protective handrails are installed around the place where the handrails and walls contact, and then knock the plastic extension pipe on the wall and handrails to hit the center of the plug. Drill a hole, fix the armrest plug to the extension pipe and wall with self-tapping wire, and then insert the armrest into the armrest plug.
7.安装楼梯导轨时,从上到下安装。
7. Install the stair guide rail from top to bottom.
此外选购扶手的过程中,我们先要看的是它的表面,表面采用的是什么材料,是否艰苦,还要检验一下它的质量是否可靠,是否存在制造的缺陷问题,等等。关注我们http://www.jnndjc.com,带您了解更多事项!
In addition, in the process of selecting and purchasing handrails, we should first look at its surface, what material is used on the surface, whether it is hard, and also check whether its quality is reliable, whether there are manufacturing defects, and so on. Follow us http://www.jnndjc.com , take you to learn more!
济南宁达建材有限公司

济南宁达建材有限公司

联系人:李经理

电话:15954121087

邮箱: 1499873208@qq.com

地址:山东省济南市天桥区小清河北路8888号滨河商务中心D栋办公楼601—1室

www.jnndjc.com(复制链接) 济南宁达建材有限公司