无障碍扶手的作用想必大家都有一定的了解，那就是便于人们在身体虚弱或不便的时候能起到支撑作用，但是如果使用者的力气较大，而且防撞扶手安装不牢的时候很容易发生脱落并导致使用者受伤，这样就得不偿失了。那么怎样安装无障碍扶手才能让它更加结实呢？接下来我们就一起来看下。
The function of barrier free handrail must be well understood, that is, it is convenient for people to play a supporting role when they are weak or inconvenient. However, if the user's strength is large, and the anti-collision handrail is not firmly installed, it is easy to fall off and cause injury to the user, which is not worth the loss. So how to install barrier free handrail to make it more solid? Next, let's take a look.
Jinan barrier free handrail
1.在安装无障碍扶手的时候要保证扶手弯头的外边缘和门套线之间的距离保持在20-30毫米。
Ensure that the distance between the handrail and the door cover is 30mm-1.
2.在安装无障碍扶手的时候还要依据安装墙面长短的不同合理控制两个防撞扶手之间支座固定点的间距，保证其能安全使用。
2. When installing the barrier free armrest, it is necessary to reasonably control the distance between the support fixed points between the two anti-collision armrests according to the length of the installation wall, so as to ensure its safe use.
3.安装时要注意保证无障碍扶手中心点距离地面的高度具有一致性，而且扶手表面还要保持平整度一致。一般要求防撞扶手的高度为900毫米。
3. Pay attention to ensure that the height of the center point of the barrier free armrest from the ground is consistent during installation, and the surface of the armrest should be kept flat. Generally, the height of the crash handrail is 900 mm.
4.在进行无障碍扶手螺栓的紧固时要注意不能用力过猛以免损坏墙体或破坏防撞扶手的美观。
4. When tightening the bolts of the barrier free handrail, pay attention not to use too much force to avoid damaging the wall or damaging the appearance of the anti-collision handrail.
要想让安装的无障碍扶手更结实，在安装的时候要做到防撞扶手的弯头和面板之间安装牢固无松动，而且要做到防撞扶手高低无落差的形成一条直线。
In order to make the installation of barrier free handrail more solid, it is necessary to make the installation between the elbow and the panel of the anti-collision handrail firm and not loose, and to make the anti-collision handrail form a straight line with no drop.
